AWS E308L-16 Stainless steels Manual electrode weld fabrication accessories
Application&Standard&Note:
1. Suitable for welding of low temperature storage tanks, containers and other -196℃ low temperature equipment, such as SUS304L, etc.
2. The standard we met: GB/T983 E308L-16, AWS A5.4 E308L-16 & A5.4M E308L-16, ISO3581-A:E(19 9 L) R 1 2, ISO3581-B:ES308L-16
Stick Electrodes, AWS Classification E308-16, Material Stainless Steel, Process Stick Welding (SMAW), For Material Type Stainless Steel to Stainless Steel, Welding Current Designation AC, DCEP, For Welding Position Flat, Horizontal, Overhead, Vertical-Up
Features
1. Titanium calcium stainless steel electrode, the main composition is 18% Cr-9%Ni
2. Stable arc, beautiful forming, fine ripples, few splashes, easy de-slagging, good fire resistance of drug skin, good stomatal resistance.
3. Excellent low temperature toughness at -196℃.
When parts and finished products are rectified, the temperature should not be lower than the following:
Low carbon steel material: -20℃;
Low alloy structural steel material: -15℃.
Generally, the allowable welding temperature of welding parts should meet the requirements of Table.
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-12.0 | 0.75 | 0.040 | 0.03 | 0.75 |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.040 | 0.03 | 0.75 |
EXAMPLE VALUE | 0.037 | 0.85 | 0.5 | 18.2 | 10.7 | 0.15 | 0.027 | 0.005 | 0.05 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | |||||||||
GB/T RULES | - | 510 | - | - | 30 | |||||||||
AWS RULES | - | 520 | - | - | 30 | |||||||||
EXAMPLE VALUE | - | 560 | - | 38/-196 | 42 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
PACKING DETAILES:
SEPCIFICATION | LENGTH | PCS/1KG | WEIGHT/1KG | |||
2.0mm | 300mm | 79PCS | 2KG | |||
2.6mm | 300mm | 48PCS | 2KG | |||
3.2mm | 350mm | 27PCS | 5KG | |||
4.0mm | 350mm | 16PCS | 5KG | |||
5.0mm | 350mm | 12PCS | 5KG |
NOTE:
H/W: horizontal position welding
O/W: over-head position welding
Typical Cases
Certificate
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-12.0 | 0.75 | 0.040 | 0.03 | 0.75 |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.040 | 0.03 | 0.75 |
EXAMPLE VALUE | 0.037 | 0.85 | 0.5 | 18.2 | 10.7 | 0.15 | 0.027 | 0.005 | 0.05 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | |||||||||
GB/T RULES | - | 510 | - | - | 30 | |||||||||
AWS RULES | - | 520 | - | - | 30 | |||||||||
EXAMPLE VALUE | - | 560 | - | 38/-196 | 42 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
PACKING DETAILES:
SEPCIFICATION | LENGTH | PCS/1KG | WEIGHT/1KG | |||
2.0mm | 300mm | 79PCS | 2KG | |||
2.6mm | 300mm | 48PCS | 2KG | |||
3.2mm | 350mm | 27PCS | 5KG | |||
4.0mm | 350mm | 16PCS | 5KG | |||
5.0mm | 350mm | 12PCS | 5KG |
NOTE:
H/W: horizontal position welding
O/W: over-head position welding