China wholesale Carbon Steels E12015-G Seal Connection Manufacturer - 490Mpa Hand Electrode For High Strength Steel – Honest Metal

Product Detail

Product Tags

Feedback (2)

We normally think and practice corresponding towards the change of circumstance, and grow up. We aim at the achievement of a richer mind and body plus the living for Low-Alloy Steels Seal Makings, Cold Solder For Electrical Connections, Cast Iron Manual Electrode Welding Connection, Welcome to contact us if you are interested in our product, we will give you a surprice for Qulity and Price.

China wholesale Carbon Steels E12015-G Seal Connection Manufacturer - 490Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:

Application&Standard

1.Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE corresponding strength of boiler, pipeline, pressure vessel, ocean engineering structure welding, such as Q345, X60 pipeline steel, etc.
2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E7015-G & A5.5M E4915-G, ISO2560-A:E 42 4 Z0.5 Ni B 2 2, ISO 2560-B: E4915 G-AP

Points for attention:

1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.

Features

1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. table mechanical properties, good plasticity, impact toughness and crack resistance.Diffused hydrogen content is low.

J507RH conforms to GBE5015-G. Tensile strength 500~600MPa yield strength 420~450MPa impact to 40 degrees can reach 100~120JRH is ultra-low hydrogen high toughness electrode. 1. The front electrode shall be baked at 350-430℃ for 1h, and then placed in the incubator at 100-150℃ for use with baking. 2. Before welding, the weldment shall be cleaned of rust, oil, water and other impurities. 3. Short arc should be used during welding, and narrow weld passage is appropriate.

High Carbon steels Solid wire welding accessories
High Carbon steels Manual electrode welding accessories

Company & Factory

factory2

Product composition and mechanical properties introduction

CHEMICAL COMPONET:

ALLOY(wt%)	C	Mn	Si	Cr	Ni	Mo	P	S	V
GB/T RULES	0.15	1.6	0.9	0.2	0.3	0.3	0.035	0.035	0.08
AWS RULES	0.15	1.25	0.9	0.2	0.3	0.3	0.035	0.035	0.08
EXAMPLE VALUE	0.075	1.17	0.5	0.04	0.02	0.007	0.017	0.009	0.01

MECHANICAL PROPERTY:

PROPERTY	YIELD STRENGTH(MPa)	EXTENSION STRENGTH(MPa)	HEATTREAMENT℃xh	ELONGATION(%)
GB/T RULES	400	490	AW	20
AWS RULES	400	490	AW	22
EXAMPLE VALUE	460	555	AW	30

RECOMMENDED WELDING PARAMETERS:

DIAMETERS SPECIFICATIONS(mm)		2.6*350	3.2*350	4.0*400	5.0*400
ELECTRICITY	H/W	80-110	100-130	130-180	180-230
(Amp)	O/W	50-80	90-120	130-160	-

NOTE:
H/W: horizontal position welding
O/W: over-head position welding

430Mpa Hand Electrode For Low Carbon Steel04

Typical Cases

430Mpa Hand Electrode For Low Carbon Steel05
cases

Certificate

certificate

Product detail pictures:

Related Product Guide:

We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for China wholesale Carbon Steels E12015-G Seal Connection Manufacturer - 490Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: moldova, Zimbabwe, Gambia, We've more than 10 years exported experience and our products and solutions have expored more than 30 countries around the word . We always hold the service tenet Client first,Quality first in our mind,and are strict with product quality. Welcome your visiting!

Carbon Steels E7016 Weld Fabrication Materials