China wholesale Carbon Steels Soldering Stuff Factory - 490Mpa Hand Electrode For High Strength Steel – Honest Metal

Product Detail

Product Tags

Feedback (2)

We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Hard-Facing Manual Electrode Metal Makings, Carbon Steels E7018-1 Seal Materials, Welding Connection, Any needs from you'll be paid out with our best notice!

China wholesale Carbon Steels Soldering Stuff Factory - 490Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:

Application&Standard

1.Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE corresponding strength of boiler, pipeline, pressure vessel, ocean engineering structure welding, such as Q345, X60 pipeline steel, etc.
2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E7015-G & A5.5M E4915-G, ISO2560-A:E 42 4 Z0.5 Ni B 2 2, ISO 2560-B: E4915 G-AP

Points for attention:

1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.

Features

1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. table mechanical properties, good plasticity, impact toughness and crack resistance.Diffused hydrogen content is low.

J507RH conforms to GBE5015-G. Tensile strength 500~600MPa yield strength 420~450MPa impact to 40 degrees can reach 100~120JRH is ultra-low hydrogen high toughness electrode. 1. The front electrode shall be baked at 350-430℃ for 1h, and then placed in the incubator at 100-150℃ for use with baking. 2. Before welding, the weldment shall be cleaned of rust, oil, water and other impurities. 3. Short arc should be used during welding, and narrow weld passage is appropriate.

High Carbon steels Solid wire welding accessories
High Carbon steels Manual electrode welding accessories

Company & Factory

factory2

Product composition and mechanical properties introduction

CHEMICAL COMPONET:

ALLOY(wt%)	C	Mn	Si	Cr	Ni	Mo	P	S	V
GB/T RULES	0.15	1.6	0.9	0.2	0.3	0.3	0.035	0.035	0.08
AWS RULES	0.15	1.25	0.9	0.2	0.3	0.3	0.035	0.035	0.08
EXAMPLE VALUE	0.075	1.17	0.5	0.04	0.02	0.007	0.017	0.009	0.01

MECHANICAL PROPERTY:

PROPERTY	YIELD STRENGTH(MPa)	EXTENSION STRENGTH(MPa)	HEATTREAMENT℃xh	ELONGATION(%)
GB/T RULES	400	490	AW	20
AWS RULES	400	490	AW	22
EXAMPLE VALUE	460	555	AW	30

RECOMMENDED WELDING PARAMETERS:

DIAMETERS SPECIFICATIONS(mm)		2.6*350	3.2*350	4.0*400	5.0*400
ELECTRICITY	H/W	80-110	100-130	130-180	180-230
(Amp)	O/W	50-80	90-120	130-160	-

NOTE:
H/W: horizontal position welding
O/W: over-head position welding

430Mpa Hand Electrode For Low Carbon Steel04

Typical Cases

430Mpa Hand Electrode For Low Carbon Steel05
cases

Certificate

certificate

Product detail pictures:

Related Product Guide:

Sincerity, Innovation, Rigorousness, and Efficiency is the persistent conception of our company for the long-term to develop together with customers for mutual reciprocity and mutual benefit for China wholesale Carbon Steels Soldering Stuff Factory - 490Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: Croatia, Melbourne, Mexico, We would very much welcome an opportunity to do business with you and have pleasure in attaching further details of our products. Excellent quality, competitive prices,punctual delivery and dependable service can be guaranteed.

Carbon Steels E12015-G Seal Connection