China wholesale Carbon Steels Welding Jointing Manufacturers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal
China wholesale Carbon Steels Welding Jointing Manufacturers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:
Application&Standard
1.Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE corresponding strength of boiler, pipeline, pressure vessel, ocean engineering structure welding, such as Q345, X60 pipeline steel, etc.
2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E7015-G & A5.5M E4915-G, ISO2560-A:E 42 4 Z0.5 Ni B 2 2, ISO 2560-B: E4915 G-AP
Points for attention:
1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.
Features
1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. table mechanical properties, good plasticity, impact toughness and crack resistance.Diffused hydrogen content is low.
J507RH conforms to GBE5015-G. Tensile strength 500~600MPa yield strength 420~450MPa impact to 40 degrees can reach 100~120JRH is ultra-low hydrogen high toughness electrode. 1. The front electrode shall be baked at 350-430℃ for 1h, and then placed in the incubator at 100-150℃ for use with baking. 2. Before welding, the weldment shall be cleaned of rust, oil, water and other impurities. 3. Short arc should be used during welding, and narrow weld passage is appropriate.
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
| GB/T RULES | 0.15 | 1.6 | 0.9 | 0.2 | 0.3 | 0.3 | 0.035 | 0.035 | 0.08 |
| AWS RULES | 0.15 | 1.25 | 0.9 | 0.2 | 0.3 | 0.3 | 0.035 | 0.035 | 0.08 |
| EXAMPLE VALUE | 0.075 | 1.17 | 0.5 | 0.04 | 0.02 | 0.007 | 0.017 | 0.009 | 0.01 |
MECHANICAL PROPERTY:
| PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | ELONGATION(%) | ||||||
| GB/T RULES | 400 | 490 | AW | 20 | ||||||
| AWS RULES | 400 | 490 | AW | 22 | ||||||
| EXAMPLE VALUE | 460 | 555 | AW | 30 | ||||||
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | |||||
| ELECTRICITY | H/W | 80-110 | 100-130 | 130-180 | 180-230 | ||||
| (Amp) | O/W | 50-80 | 90-120 | 130-160 | - | ||||
NOTE:
H/W: horizontal position welding
O/W: over-head position welding
Typical Cases
Certificate
Product detail pictures:
Related Product Guide:
We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for China wholesale Carbon Steels Welding Jointing Manufacturers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: belarus, Jordan, Jakarta, We only supply quality products and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom products etc that can according to customer's requirement.
By Prima from Rome - 2018.04.25 16:46
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Maria from Nepal - 2017.07.07 13:00
-
China wholesale Joggled Welded Joints Manufactu...
-
China wholesale Stuff That Seals Cracks Factori...
-
China wholesale Cast Iron Manual Electrode Weld...
-
China wholesale Low-Alloy Steels Solid Wire Sea...
-
China wholesale Materials In Soldering Factorie...
-
China wholesale Joggled Welded Joints Supplier ...