China wholesale Hard-Facing Flux Cored Wire Welding Stuff Manufacturer - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal
China wholesale Hard-Facing Flux Cored Wire Welding Stuff Manufacturer - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal Detail:
Application & Standard
This product is mainly used for surfacing the valves and other sealing parts of high-rise boiler units in power stations working at 570℃ or below. Adopt DC reverse connection. The surfacing metal is 1Cr13 semi-ferritic high chromium steel. Generally no heat treatment is required during welding, and the hardness is uniform. It can be annealed and softened at 750-800℃. When heated to 900-1000℃, it can be re-hardened by air cooling or oil quenching. This hand electrode is also used for surfacing of shaft and valve of carbon steel or alloy steel at working temperature below 450℃. The hardness of the surfacing layer should be controlled at about 40.
Features
GEH-507 is China GB/T984EDCr-A1-15 under a low sodium hydrogen type high chromium steel for valve surfacing welding electrode, good operation, less splash, easy slag removal, beautiful shape, can be easily mechanical processing. And the surfacing layer has the characteristics of air quenching, high medium-temperature hardness and good corrosion resistance. This TYPE OF ELECTRODE IS often USED FOR metal wear and moisture, weak acid and other action of parts, such as valve sealing surface, mixer slurry, etc. Before welding, it must be dried at 300-350℃ for 1 hour. To remove the base material surface moisture, rust stains, oil. And we should pay attention to the way of arc and arc. After the arc will arc back burning, remelting arc point, when the arc to fill the arc pit.
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | P | S |
| GB/T RULES | 0.15 | - | - | 10.00-16.00 | 0.04 | 0.03 |
| AWS RULES | - | - | - | - | - | - |
| EXAMPLE VALUE | 0.12 | 0.60 | 1.00 | 12.8 | 0.025 | 0.008 |
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 3.2*350 | 4.0*350 | 5.0*350 | |||||
| ELECTRICITY (Amp) |
80-120 | 120-160 | 160-210 | |||||
TYPICAL CASES
Certificates
Product detail pictures:
Related Product Guide:
Sincerity, Innovation, Rigorousness, and Efficiency could be the persistent conception of our enterprise to the long-term to produce together with clients for mutual reciprocity and mutual profit for China wholesale Hard-Facing Flux Cored Wire Welding Stuff Manufacturer - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal , The product will supply to all over the world, such as: Germany, Serbia, Liverpool, Many goods fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't have to waste time shopping around.
By trameka milhouse from Ethiopia - 2018.02.12 14:52
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Priscilla from Gabon - 2018.05.13 17:00
-
China wholesale Low-Alloy Steels E8018-C4 Solid...
-
China wholesale Soldering Filler Material Suppl...
-
China wholesale High Carbon Steels E11018-G Sol...
-
China wholesale Cast Iron Weld Fabrication Maki...
-
China wholesale Cast Iron Weld Fabrication Manu...
-
China wholesale Carbon Steels J606 Seal Makings...