China wholesale Hard-Facing Manual Electrode Seal Stuff Manufacturer - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal
China wholesale Hard-Facing Manual Electrode Seal Stuff Manufacturer - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal Detail:
Application & Standard
This product is mainly used for surfacing the valves and other sealing parts of high-rise boiler units in power stations working at 570℃ or below. Adopt DC reverse connection. The surfacing metal is 1Cr13 semi-ferritic high chromium steel. Generally no heat treatment is required during welding, and the hardness is uniform. It can be annealed and softened at 750-800℃. When heated to 900-1000℃, it can be re-hardened by air cooling or oil quenching. This hand electrode is also used for surfacing of shaft and valve of carbon steel or alloy steel at working temperature below 450℃. The hardness of the surfacing layer should be controlled at about 40.
Features
GEH-507 is China GB/T984EDCr-A1-15 under a low sodium hydrogen type high chromium steel for valve surfacing welding electrode, good operation, less splash, easy slag removal, beautiful shape, can be easily mechanical processing. And the surfacing layer has the characteristics of air quenching, high medium-temperature hardness and good corrosion resistance. This TYPE OF ELECTRODE IS often USED FOR metal wear and moisture, weak acid and other action of parts, such as valve sealing surface, mixer slurry, etc. Before welding, it must be dried at 300-350℃ for 1 hour. To remove the base material surface moisture, rust stains, oil. And we should pay attention to the way of arc and arc. After the arc will arc back burning, remelting arc point, when the arc to fill the arc pit.
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | P | S |
| GB/T RULES | 0.15 | - | - | 10.00-16.00 | 0.04 | 0.03 |
| AWS RULES | - | - | - | - | - | - |
| EXAMPLE VALUE | 0.12 | 0.60 | 1.00 | 12.8 | 0.025 | 0.008 |
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 3.2*350 | 4.0*350 | 5.0*350 | |||||
| ELECTRICITY (Amp) |
80-120 | 120-160 | 160-210 | |||||
TYPICAL CASES
Certificates
Product detail pictures:
Related Product Guide:
we are able to provide good quality items, aggressive rate and best shopper assistance. Our destination is You come here with difficulty and we provide you with a smile to take away for China wholesale Hard-Facing Manual Electrode Seal Stuff Manufacturer - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal , The product will supply to all over the world, such as: Singapore, Mauritius, Iceland, Based on our automatic production line, steady material purchase channel and quick subcontract systems have been built in mainland China to meet customer's wider and higher requirement in recent years. We have been looking forward to cooperating with more clients worldwide for common development and mutual benefit!Your trust and approval are the best reward for our efforts. Keeping honest, innovative and efficient, we sincerely expect that we can be business partners to create our brilliant future!
By Carol from Hongkong - 2017.12.19 11:10
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Michaelia from Irish - 2017.12.19 11:10
-
China wholesale Hard-Facing Weld Fabrication Ma...
-
China wholesale Materials Necessary For Solderi...
-
China wholesale Carbon Steels E12015-G Seal Con...
-
China wholesale Welded Framed Steel Beam Connec...
-
China wholesale Cast Iron Seal Makings Supplier...
-
China wholesale Stainless Steels A102 Welding S...