China wholesale Hard-Facing Manual Electrode Welding Materials Factory - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal
China wholesale Hard-Facing Manual Electrode Welding Materials Factory - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal Detail:
Application & Standard
This product is mainly used for surfacing the valves and other sealing parts of high-rise boiler units in power stations working at 570℃ or below. Adopt DC reverse connection. The surfacing metal is 1Cr13 semi-ferritic high chromium steel. Generally no heat treatment is required during welding, and the hardness is uniform. It can be annealed and softened at 750-800℃. When heated to 900-1000℃, it can be re-hardened by air cooling or oil quenching. This hand electrode is also used for surfacing of shaft and valve of carbon steel or alloy steel at working temperature below 450℃. The hardness of the surfacing layer should be controlled at about 40.
Features
GEH-507 is China GB/T984EDCr-A1-15 under a low sodium hydrogen type high chromium steel for valve surfacing welding electrode, good operation, less splash, easy slag removal, beautiful shape, can be easily mechanical processing. And the surfacing layer has the characteristics of air quenching, high medium-temperature hardness and good corrosion resistance. This TYPE OF ELECTRODE IS often USED FOR metal wear and moisture, weak acid and other action of parts, such as valve sealing surface, mixer slurry, etc. Before welding, it must be dried at 300-350℃ for 1 hour. To remove the base material surface moisture, rust stains, oil. And we should pay attention to the way of arc and arc. After the arc will arc back burning, remelting arc point, when the arc to fill the arc pit.
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | P | S |
| GB/T RULES | 0.15 | - | - | 10.00-16.00 | 0.04 | 0.03 |
| AWS RULES | - | - | - | - | - | - |
| EXAMPLE VALUE | 0.12 | 0.60 | 1.00 | 12.8 | 0.025 | 0.008 |
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 3.2*350 | 4.0*350 | 5.0*350 | |||||
| ELECTRICITY (Amp) |
80-120 | 120-160 | 160-210 | |||||
TYPICAL CASES
Certificates
Product detail pictures:
Related Product Guide:
We pursue the management tenet of Quality is remarkable, Company is supreme, Name is first, and will sincerely create and share success with all clientele for China wholesale Hard-Facing Manual Electrode Welding Materials Factory - Hard-facing SAW welding wire and welding flux weld fabrication accessories – Honest Metal , The product will supply to all over the world, such as: Georgia, Rotterdam, Lithuania, We hope we can establish long-term cooperation with all of the customers. And hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need!
By Steven from Tanzania - 2018.06.03 10:17
Managers are visionary, they have the idea of mutual benefits, continuous improvement and innovation, we have a pleasant conversation and Cooperation.
By Kama from Georgia - 2018.06.03 10:17
-
China wholesale High Carbon Steels J707 Solid W...
-
China wholesale Hard-Facing Manual Electrode We...
-
China wholesale Welded Column Splice Connection...
-
China wholesale Low-Alloy Steels Seal Stuff Man...
-
China wholesale Hard-Facing Weld Fabrication Ma...
-
China wholesale Low Carbon Steels Seal Connecti...