China wholesale High Carbon Steels Solid Wire Seal Makings Suppliers – 490Mpa Hand Electrode For High Strength Steel – Honest Metal
China wholesale High Carbon Steels Solid Wire Seal Makings Suppliers – 490Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:
Application&Standard
1.Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE corresponding strength of boiler, pipeline, pressure vessel, ocean engineering structure welding, such as Q345, X60 pipeline steel, etc.
2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E7015-G & A5.5M E4915-G, ISO2560-A:E 42 4 Z0.5 Ni B 2 2, ISO 2560-B: E4915 G-AP
Points for attention:
1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.
Features
1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. table mechanical properties, good plasticity, impact toughness and crack resistance.Diffused hydrogen content is low.
J507RH conforms to GBE5015-G. Tensile strength 500~600MPa yield strength 420~450MPa impact to 40 degrees can reach 100~120JRH is ultra-low hydrogen high toughness electrode. 1. The front electrode shall be baked at 350-430℃ for 1h, and then placed in the incubator at 100-150℃ for use with baking. 2. Before welding, the weldment shall be cleaned of rust, oil, water and other impurities. 3. Short arc should be used during welding, and narrow weld passage is appropriate.
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
| GB/T RULES | 0.15 | 1.6 | 0.9 | 0.2 | 0.3 | 0.3 | 0.035 | 0.035 | 0.08 |
| AWS RULES | 0.15 | 1.25 | 0.9 | 0.2 | 0.3 | 0.3 | 0.035 | 0.035 | 0.08 |
| EXAMPLE VALUE | 0.075 | 1.17 | 0.5 | 0.04 | 0.02 | 0.007 | 0.017 | 0.009 | 0.01 |
MECHANICAL PROPERTY:
| PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | ELONGATION(%) | ||||||
| GB/T RULES | 400 | 490 | AW | 20 | ||||||
| AWS RULES | 400 | 490 | AW | 22 | ||||||
| EXAMPLE VALUE | 460 | 555 | AW | 30 | ||||||
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | |||||
| ELECTRICITY | H/W | 80-110 | 100-130 | 130-180 | 180-230 | ||||
| (Amp) | O/W | 50-80 | 90-120 | 130-160 | - | ||||
NOTE:
H/W: horizontal position welding
O/W: over-head position welding
Typical Cases
Certificate
Product detail pictures:
Related Product Guide:
Bear Customer 1st, Good quality first in mind, we work closely with our prospects and supply them with efficient and professional services for China wholesale High Carbon Steels Solid Wire Seal Makings Suppliers – 490Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: Korea, Sao Paulo, Lithuania, Create Values,Serving Customer! is the aim we pursue. We sincerely hope that all customers will establish long term and mutually beneficial cooperation with us.If you wish to get more details about our company, You should contact with us now!
By Agustin from Albania - 2018.09.21 11:44
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Audrey from Botswana - 2018.09.12 17:18
-
China wholesale Welding Accessories Factory - ...
-
China wholesale Cast Iron Welding Data Factory ...
-
China wholesale Hard-Facing Manual Electrode We...
-
China wholesale Low-Alloy Steels Seal Makings S...
-
China wholesale Soldering Materials Factories -...
-
China wholesale Single Butt Weld Suppliers - A...