China wholesale High Carbon Steels Weld Fabrication Factory - 620Mpa Hand Electrode For High Strength Steel – Honest Metal
China wholesale High Carbon Steels Weld Fabrication Factory - 620Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:
Application&Standard&Note
1. Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, SUCH AS 15MnVN.
2. The standard we met: GB/T32533 E5915-3M2 P, AWS A5.5 E9015-D1 & A5.1M E6215-D1, ISO18275-A:E 55 5 Mn1NiMo B 4 2, ISO 18275-B: E6215-3M2P
When the mass fraction of carbon in high carbon steel is greater than 0.60%, the post-welding hardening, crack sensitivity tendency is greater, so the weldability is extremely poor, can not be used to manufacture welding structure. It is often used to manufacture parts and parts that need more hardness or wear resistance, and its welding work is mainly welding repair.
Points for attention:
1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.
Features
1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. Stable mechanical properties, good plasticity.
Characteristics and uses: Low sodium hydrogen type coating low alloy high strength steel electrode, using DC reverse connection, can carry on the whole position welding. Suitable for welding medium carbon steel and some low alloy high strength steel structure and corresponding grade of pressure vessel and pressure pipe welding. Such as Q420 (15MnVN) and so on. Weldable base metal: Hot rolled normalizing steel normalizing Q420A (15MnVN, 15MnVNCu, 14MnVTiRE)
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S |
GB/T RULES | 0.12 | 1.00-1.75 | 0.6 | - | 0.9 | 0.25-0.45 | 0.03 | 0.03 |
AWS RULES | 1.12 | 1.00-1.76 | 1.6 | - | 1.9 | 0.25-0.46 | 0.03 | 0.03 |
EXAMPLE VALUE | 0.078 | 1.58 | 0.36 | 0.04 | 0.73 | 0.37 | 0.011 | 0.007 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | |||||
GB/T RULES | 490 | 590 | 620*1 | |||||
AWS RULES | 530 | 620 | 620*1 | |||||
EXAMPLE VALUE | 553 | 649 | 620*1 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | |||||
ELECTRICITY | H/W | 80-110 | 110-130 | 130-180 | ||||
(Amp) | O/W | 50-80 | 90-120 | 130-160 |
NOTE:
H/W: horizontal position welding
O/W: over-head position welding
Typical Cases
Certificate
Product detail pictures:
Related Product Guide:
We know that we only thrive if we can easily guarantee our combined cost competiveness and high-quality advantageous at the same time for China wholesale High Carbon Steels Weld Fabrication Factory - 620Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: Sacramento, Belarus, Honduras, Abiding by our motto of Hold well the quality and services, Customers Satisfaction, So we give our clients with high quality products and solutions and excellent service. Be sure to feel free to contact us for further information.
By Elizabeth from Manila - 2017.06.25 12:48
The company leader recept us warmly, through a meticulous and thorough discussion, we signed a purchase order. Hope to cooperate smoothly
By Antonia from Bogota - 2018.12.05 13:53