China wholesale Low Carbon Steels Soldering Connection Factory - 620Mpa Hand Electrode For High Strength Steel – Honest Metal

Product Detail

Product Tags

Feedback (2)

The key to our success is Good Product Quality, Reasonable Price and Efficient Service for Hard-Facing Flux Cored Wire Metal Makings, Cast Iron Soldering Materials, Low-Alloy Steels E8018-B2 Welding Jointing, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.

China wholesale Low Carbon Steels Soldering Connection Factory - 620Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:

Application&Standard&Note

1. Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, SUCH AS 15MnVN.
2. The standard we met: GB/T32533 E5915-3M2 P, AWS A5.5 E9015-D1 & A5.1M E6215-D1, ISO18275-A:E 55 5 Mn1NiMo B 4 2, ISO 18275-B: E6215-3M2P

When the mass fraction of carbon in high carbon steel is greater than 0.60%, the post-welding hardening, crack sensitivity tendency is greater, so the weldability is extremely poor, can not be used to manufacture welding structure. It is often used to manufacture parts and parts that need more hardness or wear resistance, and its welding work is mainly welding repair.

Points for attention:

1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.

Features

1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. Stable mechanical properties, good plasticity.

Characteristics and uses: Low sodium hydrogen type coating low alloy high strength steel electrode, using DC reverse connection, can carry on the whole position welding. Suitable for welding medium carbon steel and some low alloy high strength steel structure and corresponding grade of pressure vessel and pressure pipe welding. Such as Q420 (15MnVN) and so on. Weldable base metal: Hot rolled normalizing steel normalizing Q420A (15MnVN, 15MnVNCu, 14MnVTiRE)

AWS E7015-A1 Low-alloy steels Manual electrode Welding accessories
High Carbon steels Manual electrode welding accessories

Company & Factory

factory2

Product composition and mechanical properties introduction

CHEMICAL COMPONET:

ALLOY(wt%)	C	Mn	Si	Cr	Ni	Mo	P	S
GB/T RULES	0.12	1.00-1.75	0.6	-	0.9	0.25-0.45	0.03	0.03
AWS RULES	1.12	1.00-1.76	1.6	-	1.9	0.25-0.46	0.03	0.03
EXAMPLE VALUE	0.078	1.58	0.36	0.04	0.73	0.37	0.011	0.007

MECHANICAL PROPERTY:

PROPERTY	YIELD STRENGTH(MPa)	EXTENSION STRENGTH(MPa)	HEATTREAMENT℃xh
GB/T RULES	490	590	620*1
AWS RULES	530	620	620*1
EXAMPLE VALUE	553	649	620*1

RECOMMENDED WELDING PARAMETERS:

DIAMETERS SPECIFICATIONS(mm)		2.6*350	3.2*350	4.0*400
ELECTRICITY	H/W	80-110	110-130	130-180
(Amp)	O/W	50-80	90-120	130-160

NOTE:
H/W: horizontal position welding
O/W: over-head position welding

430Mpa Hand Electrode For Low Carbon Steel04

Typical Cases

430Mpa Hand Electrode For Low Carbon Steel05
cases

Certificate

certificate

Product detail pictures:

Related Product Guide:

We are going to dedicate ourselves to providing our esteemed buyers together with the most enthusiastically thoughtful products and services for China wholesale Low Carbon Steels Soldering Connection Factory - 620Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: Bangladesh, Costa Rica, Kuwait, We adopted technique and quality system management, based on customer orientated, reputation first, mutual benefit, develop with joint efforts, welcome friends to communicate and cooperate from all over the world.

Carbon Steels E7018 Seal Data