China wholesale Low Carbon Steels Weld Fabrication Accessories Suppliers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal
China wholesale Low Carbon Steels Weld Fabrication Accessories Suppliers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:
Application&Standard
1.Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE corresponding strength of boiler, pipeline, pressure vessel, ocean engineering structure welding, such as Q345, X60 pipeline steel, etc.
2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E7015-G & A5.5M E4915-G, ISO2560-A:E 42 4 Z0.5 Ni B 2 2, ISO 2560-B: E4915 G-AP
Points for attention:
1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.
Features
1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. table mechanical properties, good plasticity, impact toughness and crack resistance.Diffused hydrogen content is low.
J507RH conforms to GBE5015-G. Tensile strength 500~600MPa yield strength 420~450MPa impact to 40 degrees can reach 100~120JRH is ultra-low hydrogen high toughness electrode. 1. The front electrode shall be baked at 350-430℃ for 1h, and then placed in the incubator at 100-150℃ for use with baking. 2. Before welding, the weldment shall be cleaned of rust, oil, water and other impurities. 3. Short arc should be used during welding, and narrow weld passage is appropriate.
Company & Factory
Product composition and mechanical properties introduction
CHEMICAL COMPONET:
| ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
| GB/T RULES | 0.15 | 1.6 | 0.9 | 0.2 | 0.3 | 0.3 | 0.035 | 0.035 | 0.08 |
| AWS RULES | 0.15 | 1.25 | 0.9 | 0.2 | 0.3 | 0.3 | 0.035 | 0.035 | 0.08 |
| EXAMPLE VALUE | 0.075 | 1.17 | 0.5 | 0.04 | 0.02 | 0.007 | 0.017 | 0.009 | 0.01 |
MECHANICAL PROPERTY:
| PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | ELONGATION(%) | ||||||
| GB/T RULES | 400 | 490 | AW | 20 | ||||||
| AWS RULES | 400 | 490 | AW | 22 | ||||||
| EXAMPLE VALUE | 460 | 555 | AW | 30 | ||||||
RECOMMENDED WELDING PARAMETERS:
| DIAMETERS SPECIFICATIONS(mm) | 2.6*350 | 3.2*350 | 4.0*400 | 5.0*400 | |||||
| ELECTRICITY | H/W | 80-110 | 100-130 | 130-180 | 180-230 | ||||
| (Amp) | O/W | 50-80 | 90-120 | 130-160 | - | ||||
NOTE:
H/W: horizontal position welding
O/W: over-head position welding
Typical Cases
Certificate
Product detail pictures:
Related Product Guide:
The key to our success is Good Products Good quality, Reasonable Value and Efficient Service for China wholesale Low Carbon Steels Weld Fabrication Accessories Suppliers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: Paris, Paraguay, Kenya, We now have established long-term, stable and good business relationships with many manufacturers and wholesalers around the world. Currently, we've been looking forward to even greater cooperation with overseas customers based on mutual benefits. You should feel free to contact us for more details.
By Vanessa from California - 2017.04.18 16:45
The manufacturer gave us a big discount under the premise of ensuring the quality of products, thank you very much, we will select this company again.
By Modesty from Suriname - 2017.12.19 11:10
-
China wholesale Low Carbon Steels Seal Data Sup...
-
China wholesale Nickel Alloys Ni327-10 Solid Wi...
-
China wholesale Hard-Facing D547 Soldering Join...
-
China wholesale Hard-Facing Manual Electrode So...
-
China wholesale Materials Needed For Soldering ...
-
China wholesale Parallel Fillet Weld Suppliers ...