China wholesale Low Carbon Steels Weld Fabrication Connection Manufacturers - 430Mpa Hand Electrode For Low Carbon Steel – Honest Metal

Product Detail

Product Tags

Feedback (2)

We always think and practice corresponding to the change of circumstance, and grow up. We purpose at the achievement of a richer mind and body as well as the living for Low-Alloy Steels Metal Jointing Materials, Low Carbon Steels Seal Connection, Soldering Rod Material, Our company is working through the procedure principle of integrity-based, cooperation created, people oriented, win-win cooperation. We hope we can have a pleasant relationship with businessman from all around the earth.

China wholesale Low Carbon Steels Weld Fabrication Connection Manufacturers - 430Mpa Hand Electrode For Low Carbon Steel – Honest Metal Detail:

Application&Standard&Note：

1. Welding ordinary strength of low carbon steel structure and low strength grade of low alloy steel.
2. The standard we met: GB/T5117 E4303, AWS, ISO2560-A:E 35 0 R 1 2, ISO 2560-B: E4303A, JIS Z3211 E4303

1. The insulator must be cooked, and the electrode must be baked at 180°C. When it is being welded in the workshop, it needs to be placed within the insulation cylinder.

2. Pay care when welding: To make sure the welding region is clean, it is vital to remove any oil or other contaminants from a 20mm radius around the weld before welding. The welds must be clean, bright, and free of corrosion. Proper welding form is required (according to the welding manual grinding welding) 3. The welding environment, including the wind and dust. Pay close attention, 4, the rate of welding: a typical welding rod weld length is 40CM.”

Features

1. Titanium calcium type c hemical skin carbon steel electrode.
2. Stable arc, good slag fluidity, easy slag removal, small splash, beautiful shape.

The Chinese name for the GEM-F03 low carbon hand electrode is J422, while the international label is E4303. J stands for the structural steel electrode, 42 equals 420 kg/mm2, and denotes the tensile strength of the weld metal. It is an acid electrode of the coated titanium calcium type. Used for welding LOW carbon steel structures and low strength grades of low alloy steel, commonly used for welding steel structures and standard carbon steel pipe.”

High Carbon steels Solid wire welding accessories
High Carbon steels Manual electrode welding accessories

Company & Factory

factory2

Product composition and mechanical properties introduction

CHEMICAL COMPONET:

ALLOY(wt%)	C	Mn	Si	Cr	Ni	Mo	P	S	V
GB/T RULES	0.2	1.2	1	0.2	0.3	0.3	0.04	0.035	0.08
AWS RULES	-	-	-	-	-	-	-	-	-
EXAMPLE VALUE	0.076	0.5	0.38	0.025	0.01	0.028	0.016	0.01	0.008

MECHANICAL PROPERTY:

PROPERTY	YIELD STRENGTH(MPa)	EXTENSION STRENGTH(MPa)	HEATTREAMENT℃xh
GB/T RULES	330	430	AW
AWS RULES	-	-	AW
EXAMPLE VALUE	468	538	AW

RECOMMENDED WELDING PARAMETERS:

DIAMETERS SPECIFICATIONS(mm)		2.6*350	3.2*350	4.0*400	5.0*400
ELECTRICITY	H/W	80-120	90-140	150-190	180-240
(Amp)	O/W	50-80	90-120	130-160	-

NOTE:
H/W: horizontal position welding
O/W: over-head position welding

独立站Banner图-4

Typical Cases

430Mpa Hand Electrode For Low Carbon Steel05
cases

Certificate

certificate

Product detail pictures:

Related Product Guide:

Each individual member from our large performance revenue crew values customers' needs and company communication for China wholesale Low Carbon Steels Weld Fabrication Connection Manufacturers - 430Mpa Hand Electrode For Low Carbon Steel – Honest Metal , The product will supply to all over the world, such as: Tunisia, Germany, Estonia, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.

Carbon Steels E7048 Weld Fabrication Connection