China wholesale Low Carbon Steels Weld Fabrication Materials Manufacturers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal

Product Detail

Product Tags

Feedback (2)

We continue to keep increasing and perfecting our solutions and service. At the same time, we operate actively to do research and enhancement for Hard-Facing Manual Electrode Metal Accessories, Cast Iron Manual Electrode Soldering Makings, High Carbon Steels J707 Solid Wire Seal Stuff, We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

China wholesale Low Carbon Steels Weld Fabrication Materials Manufacturers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal Detail:

Application&Standard

1.Suitable FOR WELDING OF CARBON STEEL AND LOW ALLOY STEEL, AS WELL AS THE corresponding strength of boiler, pipeline, pressure vessel, ocean engineering structure welding, such as Q345, X60 pipeline steel, etc.
2. The standard we met: GB/T5117 E5015-G AP, AWS A5.5 E7015-G & A5.5M E4915-G, ISO2560-A:E 42 4 Z0.5 Ni B 2 2, ISO 2560-B: E4915 G-AP

Points for attention:

1. Before welding, the electrode must be baked at 350℃ for 1 hour and taken as needed.
2. Before welding, the weldment must be cleaned of rust, oil, water and other impurities.
3. Welding must be performed with short arc, narrow pass welding is appropriate.

Features

1. Low hydrogen potassium electrode, stable arc, beautiful forming, exquisite, little splash, easy de-slagging, good skin fire resistance, good porosity resistance.
2. table mechanical properties, good plasticity, impact toughness and crack resistance.Diffused hydrogen content is low.

J507RH conforms to GBE5015-G. Tensile strength 500~600MPa yield strength 420~450MPa impact to 40 degrees can reach 100~120JRH is ultra-low hydrogen high toughness electrode. 1. The front electrode shall be baked at 350-430℃ for 1h, and then placed in the incubator at 100-150℃ for use with baking. 2. Before welding, the weldment shall be cleaned of rust, oil, water and other impurities. 3. Short arc should be used during welding, and narrow weld passage is appropriate.

High Carbon steels Solid wire welding accessories
High Carbon steels Manual electrode welding accessories

Company & Factory

factory2

Product composition and mechanical properties introduction

CHEMICAL COMPONET:

ALLOY(wt%)	C	Mn	Si	Cr	Ni	Mo	P	S	V
GB/T RULES	0.15	1.6	0.9	0.2	0.3	0.3	0.035	0.035	0.08
AWS RULES	0.15	1.25	0.9	0.2	0.3	0.3	0.035	0.035	0.08
EXAMPLE VALUE	0.075	1.17	0.5	0.04	0.02	0.007	0.017	0.009	0.01

MECHANICAL PROPERTY:

PROPERTY	YIELD STRENGTH(MPa)	EXTENSION STRENGTH(MPa)	HEATTREAMENT℃xh	ELONGATION(%)
GB/T RULES	400	490	AW	20
AWS RULES	400	490	AW	22
EXAMPLE VALUE	460	555	AW	30

RECOMMENDED WELDING PARAMETERS:

DIAMETERS SPECIFICATIONS(mm)		2.6*350	3.2*350	4.0*400	5.0*400
ELECTRICITY	H/W	80-110	100-130	130-180	180-230
(Amp)	O/W	50-80	90-120	130-160	-

NOTE:
H/W: horizontal position welding
O/W: over-head position welding

430Mpa Hand Electrode For Low Carbon Steel04

Typical Cases

430Mpa Hand Electrode For Low Carbon Steel05
cases

Certificate

certificate

Product detail pictures:

Related Product Guide:

The organization keeps on the procedure concept scientific management, high quality and efficiency primacy, purchaser supreme for China wholesale Low Carbon Steels Weld Fabrication Materials Manufacturers - 490Mpa Hand Electrode For High Strength Steel – Honest Metal , The product will supply to all over the world, such as: Madrid, Brazil, Cannes, Qualified R&D engineer will be there for your consultation service and we will try our best to meet your requirements. So please feel free to contact us for inquiries. You'll be able to send us emails or call us for small business. Also you are able to come to our business by yourself to get further knowing of us. And we will surely give you the best quotation and after-sale service. We're ready to build stable and friendly relations with our merchants. To achieve mutual success, we will make our best efforts to build a solid co-operation and transparent communication work with our companions. Above all, we are here to welcome your inquiries for any of our goods and service.

Carbon Steels E7015 Weld Fabrication Data