China wholesale Stainless Steels E308l-16 Manual Electrode Welding Materials Manufacturers - AWS E310-16 Stainless steels Manual electrode weld fabrication connection – Honest Metal

Product Detail

Product Tags

Feedback (2)

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Low-Alloy Steels Weld Fabrication Stuff, Flux Material In Soldering, Hard-Facing Flux Cored Wire Welding Stuff, We have more than 20 years experience in this industry, and our sales are well trained. We can give you the most professional suggestions to meet your products' requirements. Any troubles, come to us!

China wholesale Stainless Steels E308l-16 Manual Electrode Welding Materials Manufacturers - AWS E310-16 Stainless steels Manual electrode weld fabrication connection – Honest Metal Detail:

Application&Standard&Note：

Application&Standard&Note：
1. Suitable for high temperature resistant products such as high temperature furnace, coal coking equipment, etc., can also be used for dissimilar material welding.
2. The standard we met: GB/T983 E310-16, AWS A5.4 E310-16 & A5.4M E310-16, ISO3581-A:E(25 20) R 1 2, ISO3581-B:ES310-16,JIS Z3221 ES310-16

A402 stainless steel electrode is titanium calcium coated Cr26Ni21 pure austenitic stainless steel electrode.The coated metal has excellent oxidation resistance at 900~1100℃.Ac-dc dual use, has good welding process performance.

Stainless steel electrode can be divided into chromium stainless steel electrode and chromium nickel stainless steel electrode, these two types of electrode where in line with the national standard, according to GB/T983-1995 provisions of the examination. Chromium stainless steel has certain corrosion resistance (oxidizing acid, organic acid, cavitation) heat resistance and corrosion resistance. Usually used as power plant, chemical, petroleum and other equipment materials.

Features

1. Titanium calcium stainless steel electrode, the main composition is 25% CR-20% Ni.
2. Stable high temperature resistance, up to 1150℃.
3. Stable arc, beautiful forming, fine ripples, few splashes, easy de-slagging, good fire resistance of drug skin, good stomatal resistance.

Points for attention:

Base metal surface oil, dust and sundries must be removed. The welding seam should be cleaned by stainless steel brush. One side of iron filings mixed with the weld metal affects the weld quality. When the electrode is woven, the width of the weave should be within 2.5 times the diameter of the electrode. The use of money electrode must be 250-300℃ dry 60 minutes, when used to remove a small amount into the insulation 100-150℃ drying cylinder, carry out the electrode amount to 4 hours is appropriate.

High Carbon steels Solid wire welding accessories
High Carbon steels Manual electrode welding accessories

Company & Factory

factory2

Product composition and mechanical properties introduction

CHEMICAL COMPONET:

ALLOY(wt%)	C	Mn	Si	Cr	Ni	Mo	P	S	Cu
GB/T RULES	0.08-0.20	1.0-2.5	0.75	25.0-28.0	20.0-22.5	0.75	0.030	0.03	0.75
AWS RULES	0.08-0.20	1.0-2.5	0.75	25.0-28.0	20.0-22.5	0.75	0.030	0.03	0.75
EXAMPLE VALUE	0.097	2.25	0.4	26.2	21	0.3	0.026	0.004	0.05

MECHANICAL PROPERTY:

PROPERTY	YIELD STRENGTH(MPa)	EXTENSION STRENGTH(MPa)	HEATTREAMENT℃xh	IMAPACT VALUE J/℃	ELONGATION(%)
GB/T RULES	-	550	-	-	25
AWS RULES	-	550	-	-	30
EXAMPLE VALUE	-	600	-	-	35

RECOMMENDED WELDING PARAMETERS:

DIAMETERS SPECIFICATIONS(mm)		2.0*250	2.6*300	3.2*350	4.0*350	5.0*350
ELECTRICITY (Amp)	H/W	50-75	70-95	80-120	110-160	160-190
	O/W	20-50	45-80	70-110	90-135	-

PACKING DETAILES：

SEPCIFICATION	LENGTH	PCS/1KG	WEIGHT/1KG
2.0mm	300mm	79PCS	2KG
2.6mm	300mm	48PCS	2KG
3.2mm	350mm	27PCS	5KG
4.0mm	350mm	16PCS	5KG
5.0mm	350mm	12PCS	5KG

NOTE:

H/W: horizontal position welding
O/W: over-head position welding

独立站Banner图-9

Typical Cases

430Mpa Hand Electrode For Low Carbon Steel05
cases

Certificate

certificate

Product detail pictures:

Related Product Guide:

As a way to present you with ease and enlarge our enterprise, we also have inspectors in QC Workforce and assure you our greatest support and solution for China wholesale Stainless Steels E308l-16 Manual Electrode Welding Materials Manufacturers - AWS E310-16 Stainless steels Manual electrode weld fabrication connection – Honest Metal , The product will supply to all over the world, such as: Sierra Leone, Plymouth, Zimbabwe, Based on products and solutions with high quality, competitive price, and our full range service, we have accumulated experienced strength and experience, and we've built up a very good reputation in the field. Along with the continuous development, we commit ourselves not only to the Chinese domestic business but also the international market. May you moved by our high quality items and passionate service. Let's open a new chapter of mutual benefit and double win.

Stainless Steels A102 Welding Stuff