430Mpa Hand Electrode For Low Carbon Steel


  • Item No: GEM-47 (J427)
  • Suit for: CARBON STEEL
  • Power supply polarity: DC+
  • Certificate authority: NONE
  • Welding position: position
  • Product Detail

    Specification

    Product Tags

    Application & Standard

    1. Suitable for welding of carbon steel and corresponding strength of boiler, pipeline, vehicle,
    building, bridge and other structures, such as Q235.

    2. The standard we met: GB/T5117 E4315, AWS, ISO2560-A:E 35 3 B 2 2, ISO 2560-B: E4315A

    When welding carbon steel, the strength grade of the steel is typically chosen to match the electrode, taking into account the complex structure, thick plate, stiffness, dynamic load, and poor weldability. Low hydrogen type electrodes are typically chosen for their good plasticity, high impact toughness, and crack resistance. If the welding position requires a particular electrode, such as a bottom electrode, vertical downward electrode, or other special electrode, it must be utilized. The welding efficiency can be increased by using iron powder electrodes.

    Features

    1. Low sodium hydrogen electrode with a stable arc, lovely shape, tiny splash, and exquisite ripple.

    2. Consistent mechanical characteristics, strong plasticity, impact resistance, and crack resistance.

    The minimum tensile strength of molten metal is 42Kg/mm2 (420MPa) for GEM-47 type low carbon steel with hand electrode, and 7 indicates low sodium hydrogen type electrode coating, appropriate for full position welding. It is a carbon steel electrode coated with low sodium hydrogen. It may be welded in any position and runs on a DC power supply. More significant carbon steel and low alloy steel are primarily welded together.

    High Carbon steels Solid wire welding accessories
    High Carbon steels Manual electrode welding accessories

    Company & Factory

    factory2

    Product composition and mechanical properties introduction

    CHEMICAL COMPONET

    ALLOY(wt%)CMnSiCrNiMoPSV
    GB/T RULES0.201.201.000.200.300.300.0400.0350.080
    AWS RULES---------
    EXAMPLE VALUE0.0560.840.350.020.010.010.0180.0120.02

    MECHANICAL PROPERTY

    PROPERTYYIELD STRENGTH(MPa)EXTENSION STRENGTH(MPa)HEATTREAMENT℃xhIMAPACT VALUE J/℃ELONGATION(%)
    GB/T RULES330430AW27/-3020
    AWS RULES--AW--
    EXAMPLE VALUE415515AW130/-3031

    RECOMMENDED WELDING PARAMETERS

    DIAMETERS SPECIFICATIONS(mm)2.6*3503.2*3504.0*4005.0*400
    ELECTRICITY
    (Amp)
    H/W80-110110-130130-180180-240
    O/W50-8090-120130-160-

    NOTE:
    H/W: horizontal position welding
    O/W: over-head position welding

    430Mpa Hand Electrode For Low Carbon Steel04

    TYPICAL CASES

    430Mpa Hand Electrode For Low Carbon Steel05
    cases

    Certificates

    certificate

    Product Composition And Mechanical Properties Introduction

    CHEMICAL COMPONET

    ALLOY(wt%) C Mn Si Cr Ni Mo P S V
    GB/T RULES 0.20 1.20 1.00 0.20 0.30 0.30 0.040 0.035 0.080
    AWS RULES - - - - - - - - -
    EXAMPLE VALUE 0.056 0.84 0.35 0.02 0.01 0.01 0.018 0.012 0.02

    MECHANICAL PROPERTY

    PROPERTY YIELD STRENGTH(MPa) EXTENSION STRENGTH(MPa) HEATTREAMENT℃xh IMAPACT VALUE J/℃ ELONGATION(%)
    GB/T RULES 330 430 AW 27/-30 20
    AWS RULES - - AW - -
    EXAMPLE VALUE 415 515 AW 130/-30 31

    RECOMMENDED WELDING PARAMETERS

    DIAMETERS SPECIFICATIONS(mm) 2.6*350 3.2*350 4.0*400 5.0*400
    ELECTRICITY
    (Amp)
    H/W 80-110 110-130 130-180 180-240
    O/W 50-80 90-120 130-160 -

    NOTE:
    H/W: horizontal position welding
    O/W: over-head position welding


  • Previous:
  • Next:

  • Write your message here and send it to us