High Carbon steels Flux cored wire E71T-GS weld fabrication stuff
Application
Suitable for welding light structure of thin carbon steel and galvanized steel.
The standard we met: GB/T10045 T49 TG-1 N S , AWS A5.20 E71T-GS & A5.20M E491T-GS, ISO17632-A:T3T Z V NO, ISO 17632-B:T49TG-1 NO S,JIS Z3313 T49T1-1CA-U.
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
GB/T RULES | - | - | - | - | - | - | - | - | - |
AWS RULES | - | - | - | - | - | - | - | - | - |
EXAMPLE VALUE | 0.095 | 0.950 | 0.02 | 0.02 | 0.02 | 0.01 | 0.010 | 0.002 | 2.50 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | |||||
GB/T RULES | - | 490 | AW | - | - | |||||
AWS RULES | - | 490 | AW | - | - | |||||
EXAMPLE VALUE | - | 210 | AW | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 0.8 | 0.9 | 1 | 1.2 | 1.6 | |||||
VOLT | 14-19 | 16-20 | 18-25 | 18-525 | 20-26 | |||||
AMP | 40-140 | 60-160 | 80-200 | 140-260 | 180-300 | |||||
MM | 10.00-15.00 | 10.00-15.00 | 10.00-15.00 | 10.00-15.00 | 10.00-15.00 |
Peculiarity
Self-protecting flux-cored wire for high strength steel of class 490Mpa.
Easy to carry, and can carry the whole position of single pass and multi-pass welding.
Arc soft and stable, small splash.
Show details
The arc is soft and stable
Small splash
About us
Factory fioor display
Application case
Zhangjiagang CIMC Shengdaine Cryogenic Equipment Co., LTD. Cryogenic Container (LNG refueling station)
Jiangsu Donghua Energy 80,000 m3 propane storage tank
Actual factory shooting
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | V |
GB/T RULES | - | - | - | - | - | - | - | - | - |
AWS RULES | - | - | - | - | - | - | - | - | - |
EXAMPLE VALUE | 0.095 | 0.950 | 0.02 | 0.02 | 0.02 | 0.01 | 0.010 | 0.002 | 2.50 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | |||||
GB/T RULES | - | 490 | AW | - | - | |||||
AWS RULES | - | 490 | AW | - | - | |||||
EXAMPLE VALUE | - | 210 | AW | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 0.8 | 0.9 | 1 | 1.2 | 1.6 | |||||
VOLT | 14-19 | 16-20 | 18-25 | 18-525 | 20-26 | |||||
AMP | 40-140 | 60-160 | 80-200 | 140-260 | 180-300 | |||||
MM | 10.00-15.00 | 10.00-15.00 | 10.00-15.00 | 10.00-15.00 | 10.00-15.00 |
Write your message here and send it to us