Stainless Steels Flux Cored Wire E2594T1-1 Welding materials rail vehicles
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Excellent welding process performance
Excellent pitting resistance, PREN (pitting resistance equivalent) ≥40
Ripple fine
The weld microstructure is
austenitic - ferrite biphase microstructure
Applicable to welding of 25%Cr duplex steel, such as super duplex stainless steel UNS S32750 and UNS J93380
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | N | Cu | W | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 24.0-27.0 | 8.0-10.5 | 2.5-4.5 | 0.04 | 0.03 | 0.2-0.3 | 1.50 | 1.00 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 24.0-27.0 | 8.0-10.5 | 2.5-4.5 | 0.04 | 0.03 | 0.2-0.3 | 1.50 | 1.00 | |
EXAMPLE VALUE | 0.025 | 1.15 | 0.65 | 24.8 | 9 | 3.5 | 0.018 | 0.002 | 0.23 | 0.02 | 0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 760 | - | 13 | ||||
AWS RULES | - | 760 | - | 15 | ||||
EXAMPLE VALUE | - | 883 | - | 25 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Tangshan LNG export pipeline project
Welding materials for car tanks
Polypropylene reactor
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | N | Cu | W | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 24.0-27.0 | 8.0-10.5 | 2.5-4.5 | 0.04 | 0.03 | 0.2-0.3 | 1.50 | 1.00 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 24.0-27.0 | 8.0-10.5 | 2.5-4.5 | 0.04 | 0.03 | 0.2-0.3 | 1.50 | 1.00 | |
EXAMPLE VALUE | 0.025 | 1.15 | 0.65 | 24.8 | 9 | 3.5 | 0.018 | 0.002 | 0.23 | 0.02 | 0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 760 | - | 13 | ||||
AWS RULES | - | 760 | - | 15 | ||||
EXAMPLE VALUE | - | 883 | - | 25 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us