Stainless steels Flux cored wire E307T1-1 Soldering jointing
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Excellent welding process performance
Welding forgings and castings of austenitic manganese steel and carbon steel
Ripple fine
Make dissimilar steel have good crack resistance
It is suitable for welding of non-magnetic steel and dissimilar steel which is difficult to weld and crack easily
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.13 | 3.3-4.75 | 1.00 | 18.0-20.5 | 9.0-10.5 | 0.5-1.5 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.13 | 3.3-4.75 | 1.00 | 18.0-20.5 | 9.0-10.5 | 0.5-1.5 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 3.8 | 0.5 | 19.5 | 9.8 | 0.8 | 0.02 | 0.003 | 0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 590 | - | 25 | ||||
AWS RULES | - | 590 | - | 30 | ||||
EXAMPLE VALUE | - | 620 | - | 40 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Carbon steel,
stainless steel tower welding
Xinjiang Kela 2 Central
treatment plant project
China Global
demethane Tower
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.13 | 3.3-4.75 | 1.00 | 18.0-20.5 | 9.0-10.5 | 0.5-1.5 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.13 | 3.3-4.75 | 1.00 | 18.0-20.5 | 9.0-10.5 | 0.5-1.5 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 3.8 | 0.5 | 19.5 | 9.8 | 0.8 | 0.02 | 0.003 | 0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 590 | - | 25 | ||||
AWS RULES | - | 590 | - | 30 | ||||
EXAMPLE VALUE | - | 620 | - | 40 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us