Stainless steels Flux cored wire E308HT1-1 metal Jointing makings
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Excellent welding process performance
Because it contains a certain amount of carbon, it is suitable
for welding stainless steel equipment used at high temperature
Ripple fine
Extremely wide scope of application
Welding high carbon 18%Cr-8%Ni stainless steel
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.045 | 1.38 | 0.55 | 19.48 | 9.65 | 0.02 | 0.02 | 0.003 | 0.03 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 550 | - | 25 | ||||
AWS RULES | - | 550 | - | 30 | ||||
EXAMPLE VALUE | - | 615 | - | 40 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Shandong Zibo Haiyi 8 sets
3000m³ propylene ball tank
High pressure heater of
Hangzhou Boiler Group Co. LTD
85,000 cubic meter
liquefied gas Carrier (VLGC)
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.045 | 1.38 | 0.55 | 19.48 | 9.65 | 0.02 | 0.02 | 0.003 | 0.03 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 550 | - | 25 | ||||
AWS RULES | - | 550 | - | 30 | ||||
EXAMPLE VALUE | - | 615 | - | 40 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us