Stainless Steels Flux Cored Wire E308HT1-1 Sensong tank weld
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Suitable for petrochemical, pressure
vessel, food machinery, medical machinery
Chemical fertilizer and other related industries, welding 18%Cr-8%Ni stainless steel (SUS304, 304L, etc.).
Ripple fine
Because it contains a certain amount of carbon, it is suitable
for welding stainless steel equipment used at high temperature
Low melting point Bi element control is very low, the hot crack sensitivity of weld metal in high
temperature environment is reduced, the arc is soft and stable, the spatter is less, the molding
is beautiful, the slag removal is good, the wire feed is stable, has excellent welding process performance.
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.05 | 0.65 | 1.30 | 0.02 | 0.005 | 9.8 | 19.5 | 0.01 | Bi:0.0005 |
MECHANICAL PROPERTY:、
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 600 | 40 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 22-36 | 26-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-20 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
-
Welding materials for rail cars
Harbin electric three gate CMT
-
CJ50 jack-up drill
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.05 | 0.65 | 1.30 | 0.02 | 0.005 | 9.8 | 19.5 | 0.01 | Bi:0.0005 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 600 | 40 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 22-36 | 26-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-20 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |