Stainless Steels Flux Cored Wire E308LT1-1/4 Three 2 # Passive soldering
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Suitable for petrochemical, pressure
vessel, food machinery, medical machinery.
Textile machinery and other related industries, welding 18%Cr-8%Ni stainless steel (SUS304, 304L, etc.)
Ripple fine
The weld metal contains an appropriate
amount of ferrite, and the crack sensitivity is low
When Bi element content is very low, the hot cracking sensitivity of weld metal
decreases at high temperature. The arc is soft and stable, less splash, beautiful forming,
good slag removal, stable wire feeding, with excellent welding process performance.
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.02 | 0.5 | 1.10 | 0.02 | 0.004 | 10.5 | 19.5 | 0.022 | Bi≤5ppm Cu:0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 630 | 40 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 20-36 | 24-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-25 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
37,000 ton general cargo ship
Safety injection tank
-
JU2000E jack-up drilling rig
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.02 | 0.5 | 1.10 | 0.02 | 0.004 | 10.5 | 19.5 | 0.022 | Bi≤5ppm Cu:0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 630 | 40 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 20-36 | 24-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-25 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |