Stainless steels Flux cored wire E309HT1-1 weld fabrication materials
Because it contains a certain amount of carbon, it is suitable for welding stainless steel equipment used at high temperature.
The arc is soft and stable, less splash, beautiful forming, good slag removal, stable wire feeding, with excellent welding process performance.
Suitable for dissimilar steel welding of stainless steel and carbon steel or low alloy steel, bottom welding of stainless steel composite plate cladding, bottom welding of 308 series stainless steel on carbon steel or low alloy steel.
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04-0.10 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04-0.10 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.045 | 1.389 | 0.57 | 23.74 | 13.48 | 0.01 | 0.02 | 0.020 | 0.03 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 550 | - | 25 | ||||
AWS RULES | - | 550 | - | 30 | ||||
EXAMPLE VALUE | - | 570 | - | 39 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Ningbo Honest Metal Materials Co,Ltd.is an international welding professional company withindependent research and development, production, sales and management. It was established in 2020.
Zhangjiagang CIMC Shengdaine Cryogenic Equipment Co., LTD. Cryogenic Container (LNG refueling station)
Platform Supply Vessel (PSV)
Three gates 2# are not motile
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04-0.10 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04-0.10 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.045 | 1.389 | 0.57 | 23.74 | 13.48 | 0.01 | 0.02 | 0.020 | 0.03 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 550 | - | 25 | ||||
AWS RULES | - | 550 | - | 30 | ||||
EXAMPLE VALUE | - | 570 | - | 39 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us