Stainless steels Flux cored wire E309LMoT1-1 weld fabrication jointing
The weld metal contains more ferrite and the crack sensitivity is low.
The arc is soft and stable, less splash, beautiful forming, good slag removal, stable wire feeding, with excellent welding process performance.
Suitable for dissimilar steel welding of stainless steel and carbon steel or low alloy steel, bottom welding of stainless steel composite plate cladding, bottom welding of 316 series stainless steel on carbon steel or low alloy steel.
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 21.0-25.0 | 12.0-16.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 21.0-25.0 | 12.0-16.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 1.3 | 0.6 | 23.68 | 12.5 | 2.5 | 0.02 | 0.050 | 0.02 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 15 | ||||
AWS RULES | - | 520 | - | 25 | ||||
EXAMPLE VALUE | - | 600 | - | 30 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Ningbo Honest Metal Materials Co,Ltd.is an international welding professional company withindependent research and development, production, sales and management. It was established in 2020.
20,000 TEU container ship
Welding materials for rail cars
Utility boiler
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 21.0-25.0 | 12.0-16.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 21.0-25.0 | 12.0-16.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 1.3 | 0.6 | 23.68 | 12.5 | 2.5 | 0.02 | 0.050 | 0.02 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 15 | ||||
AWS RULES | - | 520 | - | 25 | ||||
EXAMPLE VALUE | - | 600 | - | 30 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us