Stainless steels Flux cored wire E309LNbT1-1 Seal connection
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Excellent welding process performance
The main component is low -24%Cr-13%Ni-Nb
Ripple fine
Suitable for transition layer of
carbon steel and low alloy steel surfacing
The arc is soft and stable, less splash, beautiful forming, good slag removal, stable wire feeding
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.7-1.0 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.7-1.0 | |
EXAMPLE VALUE | 0.025 | 1.2 | 0.5 | 23 | 12.5 | 0.01 | 0.02 | 0.050 | 0.75 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 650 | - | 35 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
85,000 cubic meter
liquefied gas Carrier (VLGC)
Zhejiang Satellite Energy
3× 60,000 m³LPG storage tank
High pressure heater of
Hangzhou Boiler Group Co. LTD
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.7-1.0 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.7-1.0 | |
EXAMPLE VALUE | 0.025 | 1.2 | 0.5 | 23 | 12.5 | 0.01 | 0.02 | 0.050 | 0.75 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 650 | - | 35 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us