Stainless steels Flux cored wire E309LT1-1 Seal stuff
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Excellent welding process performance
Weld metal contains more ferrite and has low crack sensitivity
Ripple fine
Suitable for dissimilar steel welding of
stainless steel, carbon steel and low alloy steel
The bottom welding of stainless steel clad plate cladding, the bottom
welding of 308 series stainless steel surfacing on carbon steel or low alloy steel
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 1.35 | 0.55 | 23.7 | 13.3 | 0.04 | 0.02 | 0.010 | 0.03 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 560 | - | 37 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Sichuan oil construction Lunnan Base
Polypropylene reactor
Welding materials for silencers
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 22.0-25.0 | 12.0-14.0 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 1.35 | 0.55 | 23.7 | 13.3 | 0.04 | 0.02 | 0.010 | 0.03 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 560 | - | 37 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us