Stainless Steels Flux Cored Wire E309LT1-4 semi-submersible drilling platform welding wire coil
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Suitable for stainless steel and carbon steel
or low alloy steel dissimilar steel welding
Stainless steel composite plate cladding welding, in carbon steel or
low alloy steel surfacing 308 series stainless steel bottom welding.
Ripple fine
The weld metal contains more
ferrite and the crack sensitivity is low
The arc is soft and stable, less splash, beautiful forming,
good slag removal, stable wire feeding, with excellent welding process performance
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.025 | 0.73 | 1.45 | 0.02 | 0.001 | 12.85 | 23.85 | 0.01 | - |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 590 | 37 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 22-36 | 26-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-20 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
-
Guangxi Huayi
methanol dehydrating tower
-
Shaanxi Pucheng -50℃
propane spherical tank project
-
85000 m3 Very Large
Ethane Vinyl Carrier (VLEC)
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.025 | 0.73 | 1.45 | 0.02 | 0.001 | 12.85 | 23.85 | 0.01 | - |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 590 | 37 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 22-36 | 26-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-20 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |