Stainless Steels Flux Cored Wire E316HT1-1 processing plant Consumables
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Excellent welding process performance
Because of high Mo content, excellent corrosion resistance
Ripple fine
Wide application, welding high
carbon 18%Cr-12% Ni-2%Mo stainless steel
Because it contains a certain amount of carbon,
it is suitable for welding stainless steel equipment used at high temperature
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.046 | 1.41 | 0.48 | 18.02 | 12.2 | 2.59 | 0.02 | 0.003 | 0.02 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 595 | - | 37 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Supernucleus SG
Canada LNG project
China-russia eastern front
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04-0.08 | 0.5-2.5 | 1.00 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.046 | 1.41 | 0.48 | 18.02 | 12.2 | 2.59 | 0.02 | 0.003 | 0.02 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 595 | - | 37 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us