Stainless Steels Flux Cored Wire E316LT1-1/4 LNG vehicles bottles welding material
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Suitable for petrochemical, pressure vessel, food machinery, medical machinery, chemical fertilizer and other industries, welding 18%Cr-12%Ni-2%Mo stainless steel (SUS316, SUS316L, etc.).
The weld metal contains an appropriate amount of ferrite, and the crack sensitivity is low
Ripple fine
Because of high Mo content, excellent corrosion resistance; all-position welding
-196°C low temperature toughness is excellent, suitable for low temperature storage tanks, containers and other low temperature equipment welding: soft and stable arc, less splash, beautiful forming, good slag removal, stable wire feeding, with excellent welding process performance
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.018 | 0.51 | 1.30 | 0.02 | 0.003 | 12 | 17.5 | 2.5 | Cu:0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 560 | 40 | 34/-196 | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 20-36 | 24-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-25 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
-
Xinjiang Kela 2
Central treatment plant project
-
Gansu Lanke Petrochemical -50℃
propane spherical tank project
-
High pressure heater of
Hangzhou Boiler Group Co. LTD
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.018 | 0.51 | 1.30 | 0.02 | 0.003 | 12 | 17.5 | 2.5 | Cu:0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 560 | 40 | 34/-196 | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 20-36 | 24-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-25 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |