Stainless Steels Flux Cored Wire E316LT1-1/4 Wind power application weld
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Suitable for petrochemical, pressure vessel, food machinery, medical machinery, chemical fertilizer and other industries, welding 18%Cr-12%Ni-2%Mo stainless steel (SUS316, SUS316L, etc.).
The weld metal contains an appropriate amount of ferrite, and the crack sensitivity is low
Ripple fine
Because of high Mo content,
excellent corrosion resistance;
Bi content is very low, the hot crack sensitivity of weld metal
in high temperature environment is reduced,the arc is soft and stable, the spatter is less, the molding is
beautiful, the slag removal is good,the wire feeding is stable, and the welding process has excellent performance.
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.016 | 0.65 | 1.30 | 0.018 | 0.003 | 12 | 19.5 | 2.5 | Bi:≤5ppm Cu:0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 590 | 40 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 20-36 | 24-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-25 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
-
Shandong Nuclear Power CV20
-
YAMAL LNG project
Hudong LNG carrier
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.016 | 0.65 | 1.30 | 0.018 | 0.003 | 12 | 19.5 | 2.5 | Bi:≤5ppm Cu:0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 590 | 40 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 20-36 | 24-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-25 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |