Stainless Steels Flux Cored Wire E317LT1-1 Oil Construction wheel Sud
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Excellent welding process performance
Because of high Mo content, excellent corrosion resistance
Ripple fine
The weld metal contains an appropriate
amount of ferrite and has low crack sensitivity
Wide application, welding 18%Cr-12%Ni-3%Mo stainless steel and 18%Cr-12%Ni-2%Mo-N
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 12.0-14.0 | 3.0-4.0 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 12.0-14.0 | 3.0-4.0 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 1.73 | 0.41 | 18.3 | 13.7 | 3.3 | 0.02 | 0.003 | 0.02 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 20 | ||||
AWS RULES | - | 520 | - | 20 | ||||
EXAMPLE VALUE | - | 560 | - | 34 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Zhejiang Petrochemical
diesel/crude oil storage tank
Mei Jin Hua Sheng
glycol synthetic tower
JU2000E jack-up
drilling platform
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 12.0-14.0 | 3.0-4.0 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.5 | 1.00 | 18.0-21.0 | 12.0-14.0 | 3.0-4.0 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.025 | 1.73 | 0.41 | 18.3 | 13.7 | 3.3 | 0.02 | 0.003 | 0.02 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 20 | ||||
AWS RULES | - | 520 | - | 20 | ||||
EXAMPLE VALUE | - | 560 | - | 34 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | ||||||
Volt | 22-36 | 26-38 | ||||||
Amp | 120-260 | 200-300 | ||||||
Dry extension length(mm) | 15-20 | 18-25 | ||||||
Gas flow(l/min) | 15-25 | 15-25 |
Write your message here and send it to us