Stainless Steels Flux Cored Wire E410NiMoT1-4 HEC – three, Haiyang MSR welding wire coil
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Suitable for demanding water turbine rotor,
valve and other wear and corrosion resistance occasions
Due to the addition of alloy components Ni and Mo, the corrosion resistance is more stable, the hardness
and high temperature wear resistance are improved and the generation of hot and cold cracks is effectively prevented
Ripple fine
The arc is soft and stable, less splash,
beautiful forming, good slag removal
Stable wire feeding, with excellent welding process performance
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.028 | 0.3 | 0.30 | 0.015 | 0.003 | 11.8 | 4.7 | 0.55 | - |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 650 | 35 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 22-36 | 26-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-20 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
-
High pressure heater of Hangzhou Boiler Group Co. LTD
-
Gansu Lanke Petrochemical -50℃ propane spherical tank project
-
Guangxi Huayi
methanol dehydrating tower
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | P | S | Ni | Cr | Mo | Other |
GB/T RULES | 0.028 | 0.3 | 0.30 | 0.015 | 0.003 | 11.8 | 4.7 | 0.55 | - |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | Elongation/% | IMAPACT VALUE J/℃ | Heat treatment °C*h | |||||
GB/T RULES | - | 650 | 35 | - | - |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 1.2 | 1.6 | |||
Voltage(Volt) | 22-36 | 26-38 | |||
Electricity(Amp) | 120-260 | 200-300 | |||
Speed(mm/min) | 15-20 | 18-25 | |||
Dry stretch length(mm) | 15-25 | 15-25 |