Stainless Steels Manual Electrode E2594-16 HEC – three Haiyang MSR welding wire coil
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Titanium calcium double phase
stainless steel hand electrode
The main component is 25.5Cr-10Ni-4Mo-0.25N
Ripple fine
Good resistance to pitting and stress corrosion cracking
Suitable for welding of 25%Cr duplex stainless steel in offshore oil,natural gas and petrochemical industries
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | N | Cu | |
GB/T RULES | 0.04 | 0.5-2.0 | 1.00 | 24.0-27.0 | 8.0-10.5 | 3.4-4.5 | 0.04 | 0.03 | 0.20-0.30 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.0 | 1.00 | 24.0-27.0 | 8.0-10.5 | 3.4-4.5 | 0.04 | 0.03 | 0.20-0.30 | 0.75 | |
EXAMPLE VALUE | 0.021 | 0.85 | 0.74 | 25.2 | 9.1 | 4.05 | 0.021 | 0.005 | 0.25 | 0.05 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 760 | - | 13 | ||||
AWS RULES | - | 760 | - | 15 | ||||
EXAMPLE VALUE | - | 915 | - | 22.5 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
180,000 tons Capesize bulk carrier
Arctic LNG-2 project
Wind power application
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | N | Cu | |
GB/T RULES | 0.04 | 0.5-2.0 | 1.00 | 24.0-27.0 | 8.0-10.5 | 3.4-4.5 | 0.04 | 0.03 | 0.20-0.30 | 0.75 | |
AWS RULES | 0.04 | 0.5-2.0 | 1.00 | 24.0-27.0 | 8.0-10.5 | 3.4-4.5 | 0.04 | 0.03 | 0.20-0.30 | 0.75 | |
EXAMPLE VALUE | 0.021 | 0.85 | 0.74 | 25.2 | 9.1 | 4.05 | 0.021 | 0.005 | 0.25 | 0.05 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 760 | - | 13 | ||||
AWS RULES | - | 760 | - | 15 | ||||
EXAMPLE VALUE | - | 915 | - | 22.5 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Write your message here and send it to us