Stainless Steels Manual Electrode E347-16 liquefied natural gas carrier electrode
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Titanium calcium type
stainless steel hand electrode
The main component is 18%Cr- 9%Ni-Nb
Ripple fine
Titanium calcium type
stainless steel hand electrode
High corrosion resistance
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | else | |
GB/T RULES | 0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | Cu0.75/Nb:8C-1.00 | |
AWS RULES | 0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | Cu0.75/Nb:8C-1.00 | |
EXAMPLE VALUE | 0.041 | 1.55 | 0.7 | 19.7 | 9.4 | 0.2 | 0.028 | 0.003 | Cu0.13/Nb0.50 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 645 | - | 34 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Hainan Huasheng phenol recovery tower
GDS-2209/GXS-E330 tube surfacing site
2.3 million barrels of SBM Fast4ward FPSO
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | else | |
GB/T RULES | 0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | Cu0.75/Nb:8C-1.00 | |
AWS RULES | 0.08 | 0.5-2.5 | 1.00 | 18.0-21.0 | 9.0-11.0 | 0.75 | 0.04 | 0.03 | Cu0.75/Nb:8C-1.00 | |
EXAMPLE VALUE | 0.041 | 1.55 | 0.7 | 19.7 | 9.4 | 0.2 | 0.028 | 0.003 | Cu0.13/Nb0.50 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 25 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 645 | - | 34 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Write your message here and send it to us