Stainless Steels Manual Electrode E385-16 jack-up rigs Consumables
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Titanium calcium type stainless steel hand electrode
The main component is 20%Cr- 25%Ni-5%Mo-2%Cu
Ripple fine
Effectively solve the problem of corrosion
Suitable for all kinds of strong acid tower, tank, pipeline and storage container welding
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.03 | 1.0-2.5 | 0.90 | 19.5-21.5 | 24.0-26.0 | 4.2-5.2 | 0.03 | 0.02 | 1.2-2.0 | |
AWS RULES | 0.03 | 1.0-2.5 | 0.90 | 19.5-21.5 | 24.0-26.0 | 4.2-5.2 | 0.03 | 0.02 | 1.2-2.0 | |
EXAMPLE VALUE | 0.028 | 1.35 | 0.58 | 20.5 | 25 | 4.85 | 0.02 | 0.001 | 1.70 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 28 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 600 | - | 37 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
Jiangsu Donghua Energy 80,000 m3 propane storage tank
85000 m3 Very Large Ethane Vinyl Carrier (VLEC)
High pressure heater of Hangzhou Boiler Group Co. LTD
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.03 | 1.0-2.5 | 0.90 | 19.5-21.5 | 24.0-26.0 | 4.2-5.2 | 0.03 | 0.02 | 1.2-2.0 | |
AWS RULES | 0.03 | 1.0-2.5 | 0.90 | 19.5-21.5 | 24.0-26.0 | 4.2-5.2 | 0.03 | 0.02 | 1.2-2.0 | |
EXAMPLE VALUE | 0.028 | 1.35 | 0.58 | 20.5 | 25 | 4.85 | 0.02 | 0.001 | 1.70 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||
GB/T RULES | - | 520 | - | 28 | ||||
AWS RULES | - | 520 | - | 30 | ||||
EXAMPLE VALUE | - | 600 | - | 37 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 | - |
Write your message here and send it to us