Stainless Steels Manual Electrode E410-16 semi-submersible drilling platform welding wire coil
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Titanium calcium type stainless steel hand electrode
The main component is 13%Cr
Ripple fine
Stable mechanical properties X-Ray pass rate is high
Suitable for wear and corrosion resistance of valves
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.12 | 1.00 | 0.90 | 11.0-14.0 | 0.70 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.12 | 1.00 | 0.90 | 11.0-13.5 | 0.70 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.07 | 0.46 | 0.65 | 12.6 | 0.1 | 0.05 | 0.028 | 0.008 | 0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||||
GB/T RULES | - | 450 | 730~760x1 | - | 15 | ||||||
AWS RULES | - | 520 | 730~760x1 | - | 20 | ||||||
EXAMPLE VALUE | - | 700 | 745x1 | - | 22 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
9,000 tons of chemicals
Supernucleus SG
China-russia eastern front
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.12 | 1.00 | 0.90 | 11.0-14.0 | 0.70 | 0.75 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.12 | 1.00 | 0.90 | 11.0-13.5 | 0.70 | 0.75 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.07 | 0.46 | 0.65 | 12.6 | 0.1 | 0.05 | 0.028 | 0.008 | 0.01 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||||
GB/T RULES | - | 450 | 730~760×1 | - | 15 | ||||||
AWS RULES | - | 520 | 730~760×1 | - | 20 | ||||||
EXAMPLE VALUE | - | 700 | 745×1 | - | 22 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 |
Write your message here and send it to us