Stainless Steels Manual Electrode E410NiMo-16 offshore FPSO soldering
WELDING TECHNOLOGY
Don't let the questions
Continue to haunt you
Arc instability
Unsightly molding
Excessive spatter
Titanium-calcium martensitic stainless steel electrode
The main component is 11.5%Cr-4.5%Ni-0.55%Mo
Ripple fine
Stable corrosion resistance, hardness
and high temperature wear resistance
Suitable for more demanding valves and other wear and corrosion resistance
Easy slagging
Product Parameter
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.06 | 1.00 | 0.90 | 11.0-12.5 | 4.0-5.0 | 0.40-0.70 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.06 | 1.00 | 0.90 | 11.0-12.5 | 4.0-5.0 | 0.40-0.70 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.028 | 0.45 | 0.6 | 11.6 | 4.8 | 0.55 | 0.026 | 0.007 | 0.13 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||||
GB/T RULES | - | 760 | 595-620x1 | - | 10 | ||||||
AWS RULES | - | 760 | 595-620x1 | - | 15 | ||||||
EXAMPLE VALUE | - | 925 | 620x1 | - | 17 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 |
Factory support
The product is suitable for a
wide range of applications
WELDING TECHNOLOGY
CHEMICAL COMPONET:
ALLOY(wt%) | C | Mn | Si | Cr | Ni | Mo | P | S | Cu | |
GB/T RULES | 0.06 | 1.00 | 0.90 | 11.0-12.5 | 4.0-5.0 | 0.40-0.70 | 0.04 | 0.03 | 0.75 | |
AWS RULES | 0.06 | 1.00 | 0.90 | 11.0-12.5 | 4.0-5.0 | 0.40-0.70 | 0.04 | 0.03 | 0.75 | |
EXAMPLE VALUE | 0.028 | 0.45 | 0.6 | 11.6 | 4.8 | 0.55 | 0.026 | 0.007 | 0.13 |
MECHANICAL PROPERTY:
PROPERTY | YIELD STRENGTH(MPa) | EXTENSION STRENGTH(MPa) | HEATTREAMENT℃xh | IMAPACT VALUE J/℃ | ELONGATION(%) | ||||||
GB/T RULES | - | 760 | 595-620×1 | - | 10 | ||||||
AWS RULES | - | 760 | 595-620×1 | - | 15 | ||||||
EXAMPLE VALUE | - | 925 | 620×1 | - | 17 |
RECOMMENDED WELDING PARAMETERS:
DIAMETERS SPECIFICATIONS(mm) | 2.0*250 | 2.6*300 | 3.2*350 | 4.0*350 | 5.0*350 | |||||
ELECTRICITY (Amp) |
H/W | 50-75 | 70-95 | 80-120 | 110-160 | 160-190 | ||||
O/W | 20-50 | 45-80 | 70-110 | 90-135 |
Write your message here and send it to us